Glues

Here we have glues for scale models. AK Interactive, Tamiya, Revell, Microscale, Uhu.

Items 1 to 20 of 23 total

per page

Page:
  1. 1
  2. 2
  • Tamiya extra thin cement (Quick set)

    Tamiya Extra Thin Cement is a widely popular glue among modelers around the world. You will find it in most modeler’s workshops. This version is the “quick setting” variant that dries around 4 times faster than the original Tamiya Extra Thin Cement, saving you time (and energy) holding parts in place! It also has less-tendency to seep out from part joints. Like the consistently of the original Extra Thin Cement product, the Quick Setting version is highly liquid and able to flow into small cracks, making it useful for attaching parts in very tight spaces. It can also be used to attach parts which have been pre-fitted by hand. Learn More
    Regular Price: €6.50

  • QUICK CEMENT EXTRA THIN

    40 ml.
    Special square anti rolling base.
    Ultra-thin precision maxoma fiber brush

    1. Special density.
    2. Glue by capillary action, very quick drying.

    The Quick Cement is the fastest and strongest glue on the market. Unlike other plastic adhesives it dries
    quickly and allows gluing by capillary action, being very effective in joining parts with little contact surface.

    Learn More
    Regular Price: €5.50

    Out of stock

  • EXTRA THIN CEMENT

    40 ml.
    Special square anti rolling base.
    Ultra-thin precision maxoma fiber brush

    1. Special density.
    2. Glue by capillary action, quick drying.

    The Extra Thin Cement glues by capillary action with a medium / fast drying time. It is undoubtedly the best option for general assembly work.

    Learn More
    Regular Price: €5.50

    Out of stock

  • Tamiya extra thin cement

    Liquid type plastic cement that is designed to work with plastic models and other similar plastic materials found in model making. This EXTRA THIN formula cement is used to glue together plastic model kits that use polystyrene plastic. The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse.Average drying time is 5-10 minutes before you can move onto the next step of construction.Fully cures in 24 hours. Learn More
    Regular Price: €6.00

  • PLASTIC CEMENT STANDARD DENSITY

    40 ml.
    Special square anti rolling base.

    1. Normal density and thicker maxoma fiber brush to glue.
    2. Glue by contact, quick drying.

    The classic modeling glue with medium drying time and more viscosity. It has a standard application brush for work on larger surfaces and general assembly. Great performance, is indicated for the assembly of plastic models and acts in a few seconds.

    Learn More
    Regular Price: €5.50

  • Tamiya cement

    Basic cement for polystyrene plastic with brush. Learn More
    Regular Price: €5.50

  • Regular Price: €6.00

  • Contacta Cement 12,5g

    'Revell Contacta Professional' is for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine glueing of tiny details and clear part edges. This proffesional glue is available in tow sizes. Learn More
    Regular Price: €3.50

    Out of stock

  • WOLVERINE P.V.A. GLUE

    “Wolverine” is a white glue of high quality and high resistance with drying accelerator.
    With all the properties of white glue and faster drying.
    Especially suitable for work on transparent parts and for resistant and invisible joints. to glue wood, paper, cardboard, cork, wicker, polystyrene, foam, etc.
    High viscosity extends very smoothly. It can be diluted with water to achieve the desired viscosity.
    Apply with temperatures between 10 and 35ºC. and a relative humidity of 70% maximum.
    Total cure in 6 hours (According to room temperature and applied thickness).

    Learn More
    Regular Price: €4.50

  • Contacta liquid SPECIAL

    Revell Contacta Liquid Special is a special chrome adhesive, but it can be used very universally. As the chrome layer prevents the welding effect, you either scrape off the chrome layer or - much more elegantly - use the special adhesive from Revell. Also transparent parts such as windows or cockpit hoods can be mounted well with it, because these transparent parts are not attacked by it. Revell Contacta Special also bonds metal, wood, paper, cardboard, glass and textiles both to plastic and to each other.

    Special properties:

    • Without plastic welding effect
    • Liquid consistency of the adhesive
    • With application brush located in the lid
    • Suitable for bonding of chrome parts
    • Suitable for bonding of transparent parts
    • Also bonds other materials
    Learn More
    Regular Price: €6.00

    Out of stock

  • Sand & Ballast Freeze 50 ml

    Sand & Ballast Freeze is capillary action acrylic adhesive with very low surface tension formulated to bond loose material such as sand, gravel, rubble or ballast. Allows for bonding together very tiny, even micronised grains, without disrupting the structures they are forming, tested with both fine 40 µm sands (0,04 mm) and coarse gravel up to several millimetres in diameter. Saturated terrain, can be further shaped after application. Making foot prints, dunes, tire or track prints in wet structures is easier than before!

    IMPORTANT: The product is susceptible to low temperatures and mustn't be frozen! Store and handle in room temperature.

    Learn More
    Regular Price: €5.95

    Out of stock

  • Transpa Fix 6K 20 ml

    lear parts require special handling, both styrene and CA glue types will damage clear plastic and classic dedicated clear parts adhesives are irreversible making them a hit and miss solution. With VMS Transpa Fix 6K you will have all the time in the world to position the parts and excessive adhesive is easily removed producing a stunning result! IMPORTANT: The recommended glue thinner for Transpa Fix 6K is VMS Universal weathering carrier light type, which will not damage clear parts! 

    Learn More
    Regular Price: €8.75

    Out of stock

  • Regular Price: €2.50

  • Flexy 5K Photo-Etched 20 gr

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

    Out of stock

  • Flexy 5K Photo-Etched 20 gr SLOW

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS, SLOW

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

    Out of stock

  • Flexy 5K Photo-Etched 20 gr THIN

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS, THIN

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

    Out of stock

  • Flexy 5K 20 gr Black

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

  • Debonder 30 ml

    We've all seen it: White super glue residue on plastic, hard to remove as most debonders will not just remove he glue but also react with plastic ruining the model. Not any more! With VMS GLUE-REMOVE Debonder you can remove any unwanted super glue residue with ease and no damage to the model itself!​Use: Apply debonder over CA (super glue) residue and allow 5-10 minutes for the reaction to happen. Remove the dissolved residue with a scrubber brush and wipe the area clean with a cloth, cotton bud or paper towel. If there is some residue left apply more debonder and repeat the procedure. When you are done use hair dryer to evaporate the debonder. Finally rinse your model with water and dish washing liquid prior priming and painting.

    Learn More
    Regular Price: €8.75

  • POR

    Quick-setting special adhesive for polystyrene.

    Learn More
    Regular Price: €10.00

    Out of stock

  • Power

    • transparent, universal power adhesive
    • fast, super strong and elastic
    • can be applied to one or both sides of the object to be glued (contact glueing)
    • UV and water resistant
    Learn More
    Regular Price: €4.50

Items 1 to 20 of 23 total

per page

Page:
  1. 1
  2. 2
Astra Website Security