Glues

Here we have glues for scale models. AK Interactive, Tamiya, Revell, Microscale, Uhu.

11 Item(s)

per page

  • BLACK WIDOW ULTRA RESISTANT CYANOCRYLATE GLUE

    – Ethyl cyanoacrylate with 1% rubber particles
    – Use temperature: -50º to 100º
    – Setting time: from 60 to 120 seconds. The gaps and uneven surface can increase this setting time. It is not
    necessary to use clamps. Holding the pieces firmly for 60 to 80 seconds will ensure better adhesion
    – Definitive cure time: 24 h
    – Gap filling capacity: 0.15mm
    – Viscosity: 100 mPa.S
    – Shear strength: 26.0 MPa

    Learn More

    Regular Price: Regular Price:€8.60

    Special price €6.45

    Out of stock

  • Debonder 30 ml

    We've all seen it: White super glue residue on plastic, hard to remove as most debonders will not just remove he glue but also react with plastic ruining the model. Not any more! With VMS GLUE-REMOVE Debonder you can remove any unwanted super glue residue with ease and no damage to the model itself!​Use: Apply debonder over CA (super glue) residue and allow 5-10 minutes for the reaction to happen. Remove the dissolved residue with a scrubber brush and wipe the area clean with a cloth, cotton bud or paper towel. If there is some residue left apply more debonder and repeat the procedure. When you are done use hair dryer to evaporate the debonder. Finally rinse your model with water and dish washing liquid prior priming and painting.

    Learn More
    Regular Price: €8.75

    Out of stock

  • Flexy 5K Photo-Etched 20 gr THIN

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS, THIN

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

    Out of stock

  • Flexy 5K Photo-Etched 20 gr SLOW

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS, SLOW

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

    Out of stock

  • Flexy 5K Photo-Etched 20 gr

    Combine with: photo-etched parts + polystyrene

    Recommended techniques: apply with wire

    Available volumes: 25 gr dropper bottle

    FOR PE PARTS

    Signal word Warning
    Hazard statement(s)
    EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds.
                Keep outof the reach of children

    Precautionary statement(s)
    P261 Avoid breathing vapours.
    P262 Do not get in eyes, on skin, or on clothing.

    Learn More
    Regular Price: €7.75

    Out of stock

  • Transpa Fix 6K 20 ml

    lear parts require special handling, both styrene and CA glue types will damage clear plastic and classic dedicated clear parts adhesives are irreversible making them a hit and miss solution. With VMS Transpa Fix 6K you will have all the time in the world to position the parts and excessive adhesive is easily removed producing a stunning result! IMPORTANT: The recommended glue thinner for Transpa Fix 6K is VMS Universal weathering carrier light type, which will not damage clear parts! 

    Learn More
    Regular Price: €8.75

    Out of stock

  • Sand & Ballast Freeze 50 ml

    Sand & Ballast Freeze is capillary action acrylic adhesive with very low surface tension formulated to bond loose material such as sand, gravel, rubble or ballast. Allows for bonding together very tiny, even micronised grains, without disrupting the structures they are forming, tested with both fine 40 µm sands (0,04 mm) and coarse gravel up to several millimetres in diameter. Saturated terrain, can be further shaped after application. Making foot prints, dunes, tire or track prints in wet structures is easier than before!

    IMPORTANT: The product is susceptible to low temperatures and mustn't be frozen! Store and handle in room temperature.

    Learn More
    Regular Price: €5.95

    Out of stock

  • Contacta liquid SPECIAL

    Revell Contacta Liquid Special is a special chrome adhesive, but it can be used very universally. As the chrome layer prevents the welding effect, you either scrape off the chrome layer or - much more elegantly - use the special adhesive from Revell. Also transparent parts such as windows or cockpit hoods can be mounted well with it, because these transparent parts are not attacked by it. Revell Contacta Special also bonds metal, wood, paper, cardboard, glass and textiles both to plastic and to each other.

    Special properties:

    • Without plastic welding effect
    • Liquid consistency of the adhesive
    • With application brush located in the lid
    • Suitable for bonding of chrome parts
    • Suitable for bonding of transparent parts
    • Also bonds other materials
    Learn More
    Regular Price: €6.00

    Out of stock

  • Contacta Cement 12,5g

    'Revell Contacta Professional' is for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine glueing of tiny details and clear part edges. This proffesional glue is available in tow sizes. Learn More
    Regular Price: €3.50

    Out of stock

  • EXTRA THIN CEMENT

    40 ml.
    Special square anti rolling base.
    Ultra-thin precision maxoma fiber brush

    1. Special density.
    2. Glue by capillary action, quick drying.

    The Extra Thin Cement glues by capillary action with a medium / fast drying time. It is undoubtedly the best option for general assembly work.

    Learn More
    Regular Price: €5.50

    Out of stock

  • QUICK CEMENT EXTRA THIN

    40 ml.
    Special square anti rolling base.
    Ultra-thin precision maxoma fiber brush

    1. Special density.
    2. Glue by capillary action, very quick drying.

    The Quick Cement is the fastest and strongest glue on the market. Unlike other plastic adhesives it dries
    quickly and allows gluing by capillary action, being very effective in joining parts with little contact surface.

    Learn More
    Regular Price: €5.50

    Out of stock

11 Item(s)

per page

Astra Website Security